Auto Night Lights

"The 'Activate' var only works when the sensor is in the horizontal position"

Tested in v0.2.3036.15111 and lights don't turn off during daytime.

This is an Auto Night Lighting circuit to toggle outside lights on during nighttime.

The Items you will need are as follows.

• 1 Kit_(Logic_Memory)
• 2 Kit_(Logic_I/O)
• 1 Kit_(Logic_Processor) ("Compare Unit")
• 1 Sensors (If on same circuit as Solar adjuster, can use that Sensor)

ALMemory set to 0

BatchWriter

• I/O set to Input from ALCompare
• Output to Wall Lights
• Var to On

Reader Input set to Sensor Var set to Activate

Compare Input1 set to Reader Input2 set to Memory set chip to equals

<gallery> CommentedPic.jpg|Full Visual with Settings Auto Night Light Circuit.jpg|Visual Only </gallery>   - Circuit Showing Night Light system*