History

Automated Room Light

## Definition

This is an automated light system that uses an occupancy sensor to turn lights on and off in a room.

## Disclaimer

The room needs to be closed off by a door/hatch for the logic to work and all the walls have to be put into place with at least one sheet put into them before this will work.

## What you will need

- [Kit (Sensors)](/wiki/sensors) X1
- [Kit (Logic I/O)](/wiki/kit-logic-io) X2

## Set Up

- Set up each room with its own [Power Controller](/wiki/power-controller). **Optional**
- While holding the [Kit (Sensors)](/wiki/sensors), scroll till you can place [Occupancy Sensor](/wiki/occupancy-sensor).
- While holding the [Kit (Logic I/O)](/wiki/kit-logic-io), scroll till you can place a [Logic Reader](/wiki/logic-reader).
- While holding the [Kit (Logic I/O)](/wiki/kit-logic-io), scroll till you can place a [Batch Writer](/wiki/batch-writer).
- Connect all [Cable Coils](/wiki/cable-coils) to all the ports on each of the logic, sensor, and light.

## Assigning Signals

![Simple automatic light.jpg](Simple automatic light.jpg)