History

Basic Canister Mixing Setup

# Basic Canister Mixing Setup

**Parts required**
- In line pipe canister connector
- 2 Gas connector platform
- Pipes
- Gas mixing valve
- Wires to connect gas mixer to power

**Setup**
1. Place the 2 Gas connector platforms
1. Connect the 2 gas connector platforms to the inputs of the gas mixer
1. Connect the gas mixer output to the canister connector
1. Connect the gas mixer power input to power.


**Use**
1. Put a large bottle or scrubber filled with O2 on one platform.
1. Put a large bottle or scrubber filled with H2/volatile on the other platform.
1. Use a wrench to connect both to their platforms.
1. Set gas mixer to desired combination (33% O2 67% H2)
1. Turn on gas mixer
1. Place empty canister in inline connector.