History

Kit (Liquid Pipe)

## Kit (Liquid Pipe)

:::infobox
| Property | Value |
|----------|-------|
| Stacks | Yes, 20 |
| Created With | [Hydraulic Pipe Bender](/wiki/hydraulic-pipe-bender) |
| Cost | 0.5g [Iron](/wiki/iron) |
| Volume | 20L, 6Mpa |

![Kit (Liquid Pipe)](ItemKitPipeLiquid.png)
:::
## Kit (Insulated Liquid Pipe)

:::infobox
| Property | Value |
|----------|-------|
| Stacks | Yes, 20 |
| Created With | [Hydraulic Pipe Bender](/wiki/hydraulic-pipe-bender) |
| Cost | 1g [Silicon](/wiki/silicon), 1g [Steel](/wiki/steel) |
| Volume | 20L, 6Mpa |

![Kit (Insulated Liquid Pipe)](ItemKitInsulatedLiquidPipe_Blue.png)
:::
Liquid pipes are designed to contain liquids, low-pressure gasses are OK, but they become stressed and may burst if the contents freezes solid.

The bursting pressure is 6,080 kPa which is only 10% of a gas pipe, but the 20L volume is double.
Pipes will be stressed (make a noise) when the pressure is greater than 4,864 kPa. This equals to 80% of the burst pressure.

There are the same variations as [Pipes](/wiki/pipes)

Variants of liquid pipes:
<gallery mode='traditional'>
Image: PipeLiquid.png       | Straight
Image: StructurePipeLiquidCorner.png         | Corner
Image: StructurePipeLiquidTJunction.png      | T-Junction
Image: StructurePipeLiquidCrossJunction.png  | 4-Way Junction
Image: StructurePipeLiquidCrossJunction5.png | 5-Way Junction
Image: StructurePipeLiquidCrossJunction6.png | 6-Way Junction
Image: StructurePipeLiquidCrossJunction3.png | 3-Way Corner
Image: StructurePipeLiquidCrossJunction4.png | 4-Way Corner
</gallery>

Variants of insulated liquid pipes: