History

Sleeper

## Kit (Sleeper)

:::infobox
| Property | Value |
|----------|-------|
| Created With | [Hydraulic Pipe Bender](/wiki/hydraulic-pipe-bender) |
| Cost | 25g [Steel](/wiki/steel), 10g [Gold](/wiki/gold), 10g [Copper](/wiki/copper) |

![Kit (Sleeper)](ItemKitSleeper.png)
:::
## Sleeper

:::infobox
| Property | Value |
|----------|-------|
| Power Usage | 100W |
| Placed With | [Kit (Sleeper)](/wiki/kit-sleeper) |
| Placed On | Small Grid |

:::
### Deconstruction Steps

| Step | Tool | Recovered Item |
|---|---|---|
| 1 | [Hand Drill](/wiki/hand-drill) | [Kit (Sleeper)](/wiki/kit-sleeper) |


## Description

A Sleeper stops the hunger and thirst timers while inside. Once properly setup and maintained, allows for controlled sleep giving a safe place to log off. No surrounding atmosphere needed to operate, but must take off suit in order to use.  This makes it necessary to place the sleeper in a room which is habitable by the player relative to their species (if not robotic).  It can also be used at the start of brutal runs to stop the need to eat and drink while you wait for plants to grow how ever this needs a mostly automated base.


### Basic Setup

The simplest to set up the Sleeper is is put it in a breathable room hook up power and a Passive Vent.

### Intermediate Setup Example

![Sleeper Basic Setup Example.png](Sleeper Basic Setup Example.png)


- Build the [Filtration](/wiki/atmospherics), put in [oxygen filter](/wiki/filter) so it throws out the rest
- On the output build a [Gas Tank Storage](/wiki/gas-tank-storage) or similar.
- And a [Pressure Regulator](/wiki/pressure-regulator) to feed a constant pressure to the sleeper (27-100kpa).
- [Passive Vent](/wiki/passive-vent) or similar to eject the co2 from the waste output.


- Wire it up.
- put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
- take your suit off and place in any available inventory (or in a nearby crate/hardsuit rack).
- Then turn on and jump in for a good nights rest.


This design works because the sleeper connector is bidirectional, and it needs a constant trickle of air flowing to draw out the co2 and clean it up.


Once you build larger systems you might want to feed the air at a proper temperature too, but fresh spawned characters have 20c oxygen tanks.


### Advanced Setup Example

![Sleeper advanced setup](Advanced Sleeper setup.png)
- Sleeper advanced setup*

This setup is fully autonomous and will take care of maintaining temperature, pressure as well filtering.

- Pressure Regulator is set to desired pressure (100kPa)
- It is important to place AC and [Filtration](/wiki/atmospherics) in the specified order
- Oxygen Tank could be any source of oxygen Build the [Filtration](/wiki/atmospherics), put in [oxygen filter](/wiki/filter) so it throws out the rest
- Set AC temp to something suitable (20°C)
- Build Heat sink similar to [Guide (Air Conditioning)](/wiki/guide-air-conditioning), use any suitable coolant, but make sure to have at least 100kPa in heat sink pipe.